Mavolux 5032 B and 5032 C
NEW: Mavolux 5032 C BASE

High quality luxmeter


The digital luxmeters Mavolux 5032B and 5032C are classified according to DIN 5032 Part 7 and CIE no. 69. Wide range of applications: for industry, trade, institutes, photo and film-studios. Both instruments allow measuring very high light intensities (brightest daylight, head lights) without any additional accessories. Especially the Mavolux 5032B allows measuring extreme low light intensities, such as emergency lighting.
Either Lux or footcandles can be selected as a measurement unit. The measuring range is matched automatically to the measurement value. The actual value can be held at the display by pressing the data hold key. Luminance can be measured in cd/m² (candles per square meter) with optional luminance attachment.

 

Mavolux

 

Adapter for contact measurement on computer monitors

  • Measurement of luminance in cd/m² with optional luminance attachment (accessories),
    angle of measurement: 20°
  • Silicon photo diode with V(λ) filter
  • Meets standards DIN 5032-7 and CIE no. 69
  • Spectral respons of the luminance meter is matched to the spectral sensitivity of the human eye V(λ)
  • Cosine correction for oblique inciding light
  • Rugged instrument design
  • Easy operation
  • USB-Interface (5032 B and 5032 C)
Technical Specification
 
5032 C BASE
5032 C USB
5032 B
Ranges (I...IV bzw. I...V)
0,1...199,9 lx
1...1.999 lx
10...19.990 lx
100...199.900 lx
0,1...199,9 lx
1...1.999 lx
10...19.990 lx
100...199.900 lx
0,01...19,99 lx
0,1...199,9 lx
1...1.999 lx
10...19.990 lx
100...199.000 lx
Resolution (I...IV bzw. I...V)
0,1 lx
1 lx
10 lx
100 lx
0,1 lx
1 lx
10 lx
100 lx
0,01 lx
0,1 lx
1 lx
10 lx
100 lx
Cable instrument - sensor
1,5 m, permanently attached
1,5 m, permanently attached
1,5 m, plug-in
Light collector
20 mm
10 mm
circular orifice
10 mm
circular orifice
Classification
DIN 5032-7 Class C
EN 13032-1 supplement C
DIN 5032-7 Class C
EN 13032-1 1 supplement C
DIN 5032-7 Class B
EN 13032-1 1 supplement B
Accuracy -
V(λ) adaption (f1') typical
< 7,5%
< 7,5%
< 3%
Accuracy -
cosine correction (f2')
≤ 2%
≤ 2%
≤ 2%
Accuracy -
total error typical
≤ 15%
≤ 15%
≤ 8%
Accuracy
±3 % of reading +4 digit with incandescent light (Light Norm Type A)
Measuring rate
2/s
2,5/s
2,5/s
Sensor
Silicon photodiode with V(λ) filter
Memory
100 measurements
Display
3 1/2 digits LCD-display
Display illumination
none
none
yes
Functions
Data-Hold, Max-Hold & battery test, Auto-Power-Off after 2 min without any operation
Battery
1,5 V Mignon Type AA
Autom. battery control
yes
Autom. power-off
4 min / continuous operation
Battery lifetime
approx. 45 h with Alkali-Manganese-Battery
Interface
non
USB 1.1
USB 1.1
Software
not available
GLUX
GLUX
Power supply via USB
not available
yes
yes
Operating temperature
0°C...+50°C
Dimensions
65 mm x 120 mm x 19 mm (instrument)
31 mm x 105 mm x 30 mm (sensor)
Weight
200 g (without battery)
Included in delivery
Battery, instructions
aluminum case, GLUX Software, USB cable, Battery, instructions
aluminum case, GLUX Software, USB cable, Battery, instructions
Optional accessories
 
not available
luminance adapter
luminance adapter
 
not available
adapter disc
adapter disc
 
not available
3 m measuring cable
3 m measuring cable
 
not available
5 m measuring cable
5 m measuring cable
 
not available
10 m measuring cable
10 m measuring cable
 
Technical Specification with optional luminance attachment (not classified)
 
5032 C
5032 B
Ranges (I...IV)
1...1.999 cd/m²
10...19.990 cd/m²
100... 199.900 cd/m²
1.000... 1.999.000 cd/m²
0,1...199,9 cd/m²
1...1.999 cd/m²
10...19.990 cd/m²
100... 199.900 cd/m²
Resolution (I...IV)
1 cd/m²
10 cd/m²
100 cd/m²
1.000 cd/m²
0,1 cd/m²
1 cd/m²
10 cd/m²
100 cd/m²

 

Mavolux 5032 C BASE
Digital luxmeter according to DIN 5032 Class C, incl. battery and instruction manual
359,- €
Plastic carrying case for Mavolux 5032 C BASE
49,- €
Mavolux 5032 C
Digital luxmeter according to DIN 5032 Class C, incl. USB-cable, battery, standard software GLUX, instruction manual, and carrying case
559,- €
Mavolux 5032 B
Digital luxmeter according to DIN 5032 Class B, incl. USB-cable, battery, standard software GLUX, instruction manual, and carrying case
909,- €
   
Optional accessories for Mavolux 5032 C and 5032 B  
Luminance attachment cd/m² (Candela / m²): angle: 20°. Please note that luminance measurements don't fulfull precision standard C or B any more. If you have to measure luminance according to precision class B you should use MavoSpot 2
157,- €
Adapter for contact measurements on computer monitors
24,- €
Extended sensor cable - 3 m - please order together with the Mavolux. Cannot be retrofitted afterwards.
92,- €
Extended sensor cable - 5 m - please order together with the Mavolux. Cannot be retrofitted afterwards.
102,- €
Extended sensor cable - 10 m - please order together with the Mavolux. Cannot be retrofitted afterwards.
112,- €
   
Certificates  
Calibration certificate. Calibration reference: Scientific Standard Lamp, type Wi 41 G of the PTB (Physikalisch Technische Bundesanstalt Braunschweig)
230,- €
DAkkS calibration certificate. Standard version for illuminance
430,- €
Order


Terms of sales and delivery

Products on stock are usually sent out within one week. Nevertheless, please order as early as possible. Transport is normally by FedEx Economy (±2-3 days within Europe), carriage is charged according to weight, dimensions and number of parcels.
All prices are exclusive VAT. Payments can be made within 30 days by bank transfer, within 14 days with 3% discount. All prices are subject to change without prior notice according to our terms and conditions. Check our website for actual information.

Seite drucken print this page

Long Life for Art | Christoph Waller | Hauptstr. 47 | D-79356 Eichstetten | Tel. +49(0) 7663 608 99-0 | Fax -20
E-Mail: info@llfa.de, Web: www.llfa.de, © c.waller