Micro Climate Generator miniClima

Constant humidity in display cabinets

The display cabinet and the miniClima Constant Humidity Equipment form, together with the connecting hoses, a tight air recirculation system. A miniature humidity sensor measures the relative humidity in the display cabinet and compares it to the set value. Corresponding to the difference the display case will be humidified or dehumidified.

miniClima EBC 08 The devices provide the user with the possibility to adapt the mode of operation: The device can also produce a slight overpressure inside the case by adding a small amount of surrounding air to the system air. The overpressure helps to keep your showcase free of dust.

(Pls. notice the new possibilities for bottle attachment)







Mode of operation

Click here for the Build Up In Principle (current Series EBC 08/09/F-IV)

Dehumidification
Excess humidity is condensed on a Peltier-cooled surface. The condensed liquid is collected and pumped off from the air circulation system. Longer dehumification periods are interrupted regularly by a short thawing period.

Humidification
Condensed/distilled water is pumped from the water supply bottle and vaporized into the air circulation system. Only distilled water should be used for refilling the water supply.
The modes of operation "humidification" and "de-humidification" are indicated on the controller by red light spots. The spots extinguish as soon as the set value inside the case is reached.

Alarm
Should the set value not be reached within 2, 6, 12, or 24 hours of operation (to be chosen on order) an alarm goes off.
In addition to the alarm-LEDs on the housing, every device is equipped with a composite error alarm (activated along with any specific alarm), that switches both his own LED and a potential-free change-over contact, thus providing the user with the possibility to install an external alarming device, so as to ensure to be notified in time, when a non-routine intervention by the user is needed. The reset button quits the external alarm.

2.0l Bottle/Positioning of the bottle
All devices of the current series can now be ordered to be equipped with an extra large water bottle instead of the standard 500 ml bottle. The bottle can be fixed on the side as well as in the front of the main device to save space.

Display
The display shows the actual RH-value inside the showcase. Set value can be shown by pushing a button.

Connections and Operating Elements
Backside: hose coupling, mains connection, Front: water bottle; operation switch; programmable humidity controller; LEDs (power & alarms); reset button; cage clamps for sensor cable, trip line cable and external alarm; datalogger interface (if installed).

Service
After 15 - 20 000 working hours the instrument should be sent back to factory for general service (every 2 years of continuous use).

Technical data

 
EBC 08
EBC 09
Setpoint
30 - 75% rF
Sample Achievable Set Point Range at Ambient Conditions of 22 ºC / 50 % r.F.
Factory-set Switching Sensitivity
± 2% rF
Tolerance
± 3% rF
Permissible Ambient Conditions for Operation and Storage
5 - 35°C / 15 - 80% rF
Mains Connection
(fuse protected, earthed)
230 VAC / 50 Hz (standard)
90 to 264 VAC / 47 to 440 Hz (possible)
Dimensions without bottle
(Dimensions for total required space
with bottle: click here for PDF)
H: 133,5 mm
W: 378,5 mm
D: 238,5 mm
H: 133,5 mm
W: 378,5 mm
D: 243,5 mm
System Voltage (Internal),
Power Consumption
12 VDC,
65 W max.
Noise Emission
free standing, measured from 1 m: 48,1 dB(A)
mounted in a showcase plinth, measured from 1 m: 37,0 dB(A)
Housing
Coated steel sheet, 1.5 mm, 1,5 mm, Pigeon-blue (RAL 5014)
Weight
6.6 kg
(without accessories, bottle, hosepipes or cables etc)
Recommended Volume of the Showcase
If the volume of a cabinet exceeds the capacity of a master unit, dedicated slave units (EBC 08F, EBC 09F), can be added to the system to increase the performance up to the level required.
up to 3 m³
up to 5 m³

Included in delivery

  • programmable humidity controller
  • temperature- / humidity sensor with cable (cable-adapter and plug) 2 m
  • cuppling cable with plug plug and female connector, 2 m
  • mains cable with with safety- and device plug, 1,8 m
  • plastic hose for EBC 08: UFX 25 - 3 m; for EBC 09: UFX 32 - 5 m
  • hose adapter, 2 pc. for EBC 08: VE 25; for EBC 09: VE 32
  • optional: water bottle with 2000 ml (instead of standard 500 ml)
miniClima EBC 08

Optional features

>> click here for more details

miniClima Constant Humidity Device EBC 08 up to 3 m³ max.

price upon request
miniClima Constant Humidity Device EBC 09 up to 5 m³ max.

price upon request
miniClima Constant Humidity Device EBC 08F slave unit,
without humidity controller, withut sensor, but with
  • cuppling cable with plug plug and female connector, 2 m
  • mains cable with with safety- and device plug, 1,8 m
  • plastic hose UFX 25 - 5 m
  • hose adapater VE 25 - 2 pc
price upon request
miniClima Constant Humidity Device EBC 09F slave unit
without humidity controller, withut sensor, but with
  • cuppling cable with plug plug and female connector, 2 m
  • mains cable with with safety- and device plug, 1,8 m
  • plastic hose UFX 32 - 5 m
  • hose adapter VE 32 - 2 pc.
price upon request
Datalogger for RH and Temperture (incl. time and date) ,
to be installed into EBC 08 or EBC 09, 1024 measurement values
price upon request
Software for datalogger for Windows, on CD
price upon request
Air Distribution Boxes For more details click here...
price upon request
Air Circulation Filter "FLT" For more details click here...
price upon request
miniClima - Central Constant Humidity Device
supply-unit for several showcases, up to 350 m³ approx.
price upon request
Feedback form


Terms of sales and delivery

Products on stock are usually sent out within one week. Nevertheless, please order as early as possible. Transport is normally by FedEx Economy (±2-3 days within Europe), carriage is charged according to weight, dimensions and number of parcels.
All prices are exclusive VAT. Payments can be made within 30 days by bank transfer, within 14 days with 3% discount. All prices are subject to change without prior notice according to our terms and conditions. Check our website for actual information.

Seite drucken print this page

Long Life for Art | Christoph Waller | Hauptstr. 47 | D-79356 Eichstetten | Tel. +49(0) 7663 608 99-0 | Fax -20
E-Mail: info@llfa.de, Web: www.llfa.de, © c.waller