Testo Saveris - radio system for temperature and relative humidity

Testo Saveris Base

The Base is the heart of Testo Saveris. It can save 40 000 readings per measurement channel independent of the PC. The system data and alarms are visible via the display of the Saveris base.

  • Alarm by means of an LED / relay output if the limit value is exceeded (even without the PC running)
  • SMS alarm (optional)
  • Emergency battery integrated (for data back-up and for emergency SMS with failure of the power supply)
  • Can incorporate 150 radio and Ethernet probes or 254 measurement channels
  • Connected to the PC either via USB or Ethernet cable
Memory: 40 000 values per channel (total max. 10 160 000 values)
Radio frequency: 868 MHz
Power supply: 6,3 V DC mains unit (must be ordered additionally)
alternatively: via 24 V AC/DC plug-in/screw terminals, power consumption < 4 W
Rechargeable battery: Li-ion battery (emergency battery for data back-up in case of power blackout)
Oper. temperature: -10°C...+50°C
Storage temperature: -40°C...+85°C
Display: graphical display, 4 control keys
Interfaces: USB / radio / Ethernet
Connectable radio probe: max. 15 probes can be directly connected via radio interface
max. 150 total via radio/router/converter/Ethernet, max. 254 channels
Alarm relay: max. 1 A, max. 30 W, max. 60/25 V DC/AC, NC or NO contact
GSM module: 850 / 900 / 1800 / 1900 MHz
not valid for Japan and South Korea
Set up: Table base and wall bracket included
Material/Housing: Diecast zinc / plastic
Protection class: IP42
Dimensions: 225 x 150 x 49 mm
Weight: approx. 1510 g

Magnetic foot aerial

Alarm module

   
Testo Saveris Base: radio frequency 868 MHz (without mains unit), Nr. 0572 0120
689,00 €
Testo Saveris Base: radio frequency 868 MHz, GSM module integrated for SMS alarm (without mains unit, without magnetic foot aerial), Nr. 0572 0121
1.087,00 €

Power supply

100 - 240 V DC mains unit; for Testo Saveris base, router, converter and Ethernet probe, Nr. 0554 1096
43,00 €
Mains unit (rail mounting) 90...264 VAC / 24 VDC (2,5 A), Nr. 0554 1749
167,00 €
Mains unit (desk-top) 110...240 VAC / 24 VDC (350 mA), Nr. 0554 1748
132,00 €
Other accessories  

Magnetic foot aerial with 3 m cable, for base with GSM module, Nr. 0554 0524

70,00 €

Alarm module (visual and acoustic), can be connected to base alarm relay, Ø 70 x 164 mm, 24 V AC/DC, 320 mA, steady on: red, steady tone: buzzer approx. 2,4 kHz, Nr. 0629 6666

upon request
Order

nach obenTesto Saveris radio probe

In the measuring cycle, the probes save the recorded measurement data and send it to the central base at regular intervals. If a limit value is exceeded, a radio link is established immediately. Through bidirectional transmission, the radio probe and the base are in mutual contact. This therefore ensures that the measurement data is only recorded by the base and is not interfered with by other radio systems.
Through the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal.

  • An alarm sounds in the event that the radio link be interrupted by obstacles
  • Memory in the probes ensures that the measurement data is not lost in case of an interference in the radio link
  • An optimized battery design ensures for long running life of the probe memory
  • Transmission path in free field: approx. 300 m
  • Radio link can be improved or lengthened by using a router
  • Probe versions with internal and external sensors
  • Available with or without a display
  • Shown on the display: current measurement data, the battery status and the quality of the radio link
Characteristics of all radio probes
Transmission path: approx. 300 m in free field (at frequency 868 MHz)
Radio frequency: 868 MHz
Measuring rate: Standard 15 min, 1 min to 24 h can be set
Storage temperature: -40°C...+55°C
Display (optional): LCD, 2 lines; 7-segment with symbols
Wall bracket: included
Battery type: 4 AA batteries
Battery life: 3 years (at +25°C)
for freezer applications: 3 years with L91 Photo lithium Energyzer batteries
Material/Housing: plastic
Dimensions: 80 x 85 x 38 mm
Weight: ca. 240 g
   
 

Saveris T1

Saveris T2

Saveris T3

Saveris Pt

Saveris H3

Internal sensor
Probe type :
NTC
NTC
NTC
Humidity sensor
Meas. range:
-35°C...+50°C
-35°C...+50°C
-20°C...+50°V
0...100% RH
Accuracy:
±0,4°C (-25°C...+50°C)
±0,8°C (remaining range)
±0,4°C (-25°C...+50°C)
±0,8°C (remaining range)
±0,5°C
±3% RH
Resolution:
0,1°C
0,1°C
0,1°C / 0,1°Ctd
0,1%
External sensor
Probe type:
Meas. range (instrument):
-50°C...+150°C

-195°C...+1350°C (type K)
-100°C...+750°C (type J)
-200°C...+400°C (type T)
0...+1760°C (type T)

-200°C...+600°C
Accuracy (instrument):
±0,2°C (-25°C...+70°C
±0,4°C (remaining range)
0,5°C or 0,5% of mv
at +25°C:
±0,1°C (0...+60°C)
±0,2°C (-100...+200°C)
±0,5°C (remaining range)
Resolution:
0,1°C
0,1°C
1°C (type S)
0,01°C
Additional characteristics
Connection:
NTC via mini-DIN socket, door contact connection cable included in delivery (1,80 m)
2 x TCs via TC socket, max. difference in potential 2 V
1 x Pt100 via mini-DIN socket
Protection class:
IP68
IP68
IP54
IP68
IP42
Conformity with standards:
DIN EN 12830
DIN EN 12830
Oper. temperature:
-35°C...+50°C
-35°C...+50°C
-20°C...+50°C
-20°C...+50°C -20°C...+50°C
   
Saveris T1 radio probe with internal NTC, without Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 1110
172,00 €
Saveris T1 D radio probe with internal NTC, with Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 1120
216,00 €
Saveris T2 radio probe with external probe connection and internal NTC and door contact, without Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 1111
216,00 €
Saveris T2 D radio probe with external probe connection and internal NTC and door contact, with Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 1121
259,00 €

Saveris T3 2-channel radio probe with 2 external TC probe connections (choice of TC characteristics), without Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 9112

302,00 €
Saveris T3 D 2-channel radio probe with 2 external TC probe connections (choice of TC characteristics), with Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 9122
345,00 €
Saveris Pt D radio probe with 1 external Pt100 probe connection, without Display,incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 7111
302,00 €
Saveris Pt radio probe with 1 external Pt100 probe connection, with Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 7121
345,00 €
Saveris H3 humidity radio probe (1 internal NTC, 1 humidity sensor), without Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 6110
354,00 €
Saveris H3 D humidity radio probe (1 internal NTC, 1 humidity sensor), with Display, incl. 4 x AA alkali manganese mignon batteries, Nr. 0572 6120
399,00 €
External temperature sensors  
 
 
 
Power supply  
Battery for radio probe: 4 x AA alkali manganese mignon batteries, Nr. 0515 0414
8,00 €
Battery for radio probe for use below -10°C: 4 x Energyzer L91 Photo lithium, Nr. 0515 0572
29,00 €
Order

nach obenTesto Saveris Ethernet probe

The existing LAN infrastructure can be used through the Ethernet probes. This allows the data transfer from the probe to the base, even over long distances. Ethernet probes can be used over any long periods since they are connected to the mains and therefore work independently of batteries.

  • A display shows the current measurement data and the probe status
  • Different probe versions available
  • Internal memory: stored data won't get lost in case of power blackout
Characteristics of all Ethernet probes
Power supply: 6,3 V DC mains unit (must be ordered additionally)
alternatively: via 24 V AC/DC plug-in/screw terminals
Buffer battery : Li-ion
Connection: Mini-Din service interface is accessible externally
Measuring rate: 2 s to 24 h
Oper. temperature: -20°C...+70°C
Storage temperature: -40°C...+85°C
Display: LCD, 2 lines, 7-segment with symbols
Protection class: IP54
Wall bracket: included
Material/Housing: plastic
Dimensions: approx. 85 x 100 x 38 mm
   
 

Saveris Pt E

Saveris T4 E

Saveris H2 E

Saveris H1 E

External Sensor        
Probe type: Pt100 TC type T / S / K / J Humidity Temperature Humidity Temperature
Meas. range (instrument): -200°C...+600°C -200°C...+400°C (type T)
0...+1760°C (type S)
-195°C...+1350°C (type K)
-100°C...+750°C (type J)
0...100% RH * -20°C...+70°C 0...100% RH * -20°C...+70°C
Accuracy (instrument): bei +25°C:
±0,1°C (0...+60°C)
±0,2°C (-100...+200°C)
±0,5°C (remaining range)
0,5°C or 0,5% of mv ±2% RH (to 90% RH)
±3% RH (> 90%RH)
±0,5°C ±(1% RH + 0,7% of mv) at +25°C (bis 90% RH)
±(1,4% RH + 0,7% of mv) at +25°C (> 90%RH)
±0,2°C (0...+30°C)
±0,5°C (remaining range)
Resolution: 0,01°C 0,1°C
1°C (type S)
0,1% / 0,1°C td 0,1°C 0,1% / 0,1° C td 0,1°C
Additional characteristics        
Connection: 1 x Pt 100 via mini-DIN socket 4 x TCs via TC socket, max. difference in potential 50 V    
Weight: approx. 220 g approx. 220 g approx. 230 g approx. 230 g
         
* not for continuous high-humidity applications
   
Saveris Pt E Ethernet probe with external Pt100 probe, with Display, Nr. 0572 7191
388,00 €
Saveris T4 E 4-channel Ethernet probe with 4 external TC probe connections, with Display, Nr. 0572 9194
512,00 €
Saveris H2 E Humidity Ethernet probe 2% and NTC probe, with Display, Nr. 0572 6192
431,00 €
Saveris H1 E Humidity Ethernet probe 1% and NTC probe, with Display, Nr. 0572 6191
743,00 €
External temperature sensors  
 
 
 

Power supply

100 - 240 V DC mains unit; for Testo Saveris base, router, converter and Ethernet probe, Nr. 0554 1096
38,00 €
Sintered caps for Saveris H1 E and H2 E Ethernet probes
Metal protection cage, Ø 12 mm for humidity probes, for measurements in flow velocities of less than 10 m/s, Nr. 0554 0755
28,00 €
Cap with wire mesh filter, Ø 12 mm, Nr. 0554 0757
28,00 €
Teflon sintered filter, Ø 12 mm, for corrosive substances, high humidity range (long-term measurements), high velocities, Nr. 0554 0756
42,00 €
Stainless steel sintered cap, Ø 12 mm, is screwed onto humidity probe, for measurements at high flow velocities or in contaminated air, Nr. 0554 0647
38,00 €
Order

nach obenTesto Saveris router

The radio link can be improved or lengthened with poor structural conditions by using a router. Naturally several routers are possible in the Testo Saveris system, but several routers are not connected in series.

Power supply: 6,3 V DC mains unit (must be ordered additionally)
alternatively: via 24 V AC/DC plug-in/screw terminals, power consumption < 0,5 W
Interface: radio
Connectable radio probe: max. 5
Dimensions: approx. 85 x 100 x 38 mm
Weight: approx. 180 g
   

nach obenTesto Saveris converter

Through the connection of a converter to an Ethernet jack the signal of a radio probe can be converted into an Ethernet signal.

Power supply: 6,3 V DC mains unit (must be ordered additionally)
alternatively: via 24 V AC/DC plug-in/screw terminals, power consumption < 2 W
Interface: radio / Ethernet
Connectable radio probe: max. 15
Dimensions: approx. 85 x 100 x 35 mm
Weight: approx. 190 g
   
Characteristics: Saveris Router and Saveris Converter
Oper. temperature: -20°C...+50°C
Storage temperature: -40°C...+85°C
Material/Housing: plastic
Protection class: IP54
Wall bracket: included
   
Testo Saveris Router: 868 MHz, radio transmission medium (without mains unit), Nr. 0572 0119
159,00 €
Testo Saveris Converter: 868 MHz, converts the radio transmission medium to Ethernet (without mains unit), Nr. 0572 0118
310,00 €

Power supply

100 - 240 V DC mains unit; for Testo Saveris base, router, converter and Ethernet probe, Nr. 0554 1096 38,00 €
Mains unit (rail mounting) 90...264 VAC / 24 VDC (2,5 A), Nr. 0554 1749 150,00 €
Mains unit (desk-top) 110...240 VAC / 24 VDC (350 mA), Nr. 0554 1748 120,00 €
Order

topTesto Saveris Software

The Saveris software is neccessary for the interpretation of the stored measurement data. The initial system and probe configuration is also performed using the software.
All measurement are saved centrally in the software's database and can be called up any time as a table or a graph. All alarms that occur are listed in a table as a history. The automatic creation of PDF reports in defined intervals also simplifies the documentation.
In the event of an alarm the user can choose between receiving a message via e-mail or a pop-up directly on the screen.

The PROF (Professional) software version offers interesting additional functions, e.g. the integration into the network via Ethernet or a comprehensive alarm management.

Characteristics (SBE and PROF version):

  • Simple installation and configuration
  • Diagrams / tables / alarm overview / PDF reports
  • Calendar management
  • Representation of probe group
  • Transmission of alarms (email, SMS, relay)

Additional functions PROF version:

  • Comprehensive alarm management: more than 2 people at the same time or in succession can be alarmed
  • Constant monitoring in PC continuous operation
  • Measurement data on background photo of locations
  • Integration into network (client-server)
Software SBE (Small Business Edition), incl. USB connecting cable base-PC, Nr. 0572 0180 322,80 €
Software PROF (Professional), incl. USB connecting cable base-PC, Nr. 0572 0181 991,10 €
Saveris adjustment software incl. connection cable for wireless and Ethernet probe, Nr. 0572 0183 316,30 €
Order


Terms of sales and delivery

Products on stock are usually sent out within one week. Nevertheless, please order as early as possible. Transport is normally by FedEx Economy (±2-3 days within Europe), carriage is charged according to weight, dimensions and number of parcels.
All prices are exclusive VAT. Payments can be made within 30 days by bank transfer, within 14 days with 3% discount. All prices are subject to change without prior notice according to our terms and conditions. Check our website for actual information.

Seite drucken print this page

Long Life for Art | Christoph Waller | Hauptstr. 47 | D-79356 Eichstetten | Tel. +49(0) 7663 608 99-0 | Fax -20
E-Mail: info@llfa.de, Web: www.llfa.de, © c.waller